HVAC air duct cleaning — the whole system, not half of it.
Ductwork, coils, blower motor, heat exchanger, and filter — cleaned as one connected system. Source-removal cleaning that actually pulls contaminants out, not just moves them around.
FREE INSPECTION
📍 On-site · Brooklyn, NY
What Is HVAC Air Duct Cleaning?
Your air ducts are only one part of a connected system. Dust and debris don't stop at the duct walls — they settle on the coils, cling to the blower motor, and build up around the heat exchanger too.
HVAC air duct cleaning treats it as one system: loosening contaminants from every surface (agitation), then pulling them out through a sealed, HEPA-filtered vacuum (source removal) — so nothing gets stirred back into your air.
Every Component We Clean
A proper HVAC cleaning covers the entire system — not just the parts you can see from the register.
Air Ducts
Supply and return runs, cleaned separately.
Coils
Evaporator and condenser coils, cleared of grime.
Drain Pan
Checked and cleaned to prevent standing moisture.
Registers & Grilles
Removed, cleaned, and reset.
Air Plenum
The central distribution chamber, cleared of buildup.
Blower Motor & Assembly
Freed of dust that adds strain and noise.
Heat Exchanger
Cleaned where accessible, for safer, efficient operation.
Air Filter & Cleaner
Inspected, cleaned, or replaced as part of the visit.
Signs Your HVAC System Needs Cleaning
If a couple of these sound familiar, it's worth a free inspection before it gets worse.
Weak or uneven airflow from room to room
System runs longer to hit the same temperature
Musty smell when heating or cooling turns on
Rising energy bills without a clear reason
Visible dust around vents or on the blower
Allergy symptoms that ease up away from home
📍 Inspection findings · Brooklyn, NY
Our Source-Removal Process
Two-stage cleaning: loosen contaminants, then collect them — nothing gets pushed further into the system.
System Inspection
Camera inspection of ductwork and a check of the full HVAC unit.
Seal & Protect
Registers sealed, floors and furniture covered before work begins.
Agitation
Brushes and compressed air loosen debris from every surface.
HEPA Extraction
Negative-pressure vacuum pulls contaminants out through a sealed line.
Component Cleaning
Coils, blower motor, and heat exchanger addressed directly.
Final Inspection
A second camera pass confirms the whole system is clean.
Built for Heating & Cooling, Not Just One Season
Brooklyn homes swing from humid summers to cold winters, and most HVAC systems handle both heating and cooling through the same ductwork. A cleaning that only addresses one side leaves the other half of the year uncovered.
We clean supply and return pathways along with the connections to both your heating and cooling equipment, so the system performs consistently whichever way it's running.
📍 After cleaning · Brooklyn, NY
Benefits of Whole-System Cleaning
Better airflow
Clear coils and ducts mean even heating and cooling.
Lower energy bills
A system that isn't fighting buildup runs less to do the same job.
Longer equipment life
Less strain on the blower motor and heat exchanger over time.
Cleaner indoor air
Fewer allergens recirculated through the whole home.
Fewer breakdowns
Dust-related strain is a common cause of avoidable repairs.
How Often Should Your HVAC System Be Cleaned?
General guidance — actual timing depends on your household and system use.
Typical interval with normal household use.
Higher particulate load shortens the interval.
Construction dust settles directly into the system.
Between full cleanings, to catch buildup early.
Cost of HVAC Air Duct Cleaning
Pricing depends on system size, accessibility, and condition — a free inspection gets you a firm number before any work starts.
For a standard residential system, condition-dependent.
Every job starts with a free, no-obligation inspection.
Thorough work on ducts, coils, blower, and filter takes time.
The number we quote is the number you pay.
Professional Cleaning vs. DIY
No surprises, no shortcuts
HVAC Air Duct Cleaning FAQs
What's the difference between duct cleaning and HVAC cleaning?
Duct cleaning covers the ductwork itself; HVAC cleaning includes the ducts plus coils, blower motor, heat exchanger, and filter — the whole connected system.
How often should the whole system be cleaned?
On average every 5–7 years, or every 2–3 years with pets, allergies, or heavy system use.
What is "source removal" cleaning?
It's the NADCA-recognized method of loosening contaminants with agitation, then extracting them with a sealed HEPA vacuum — rather than just stirring dust around.
Do you clean the coils and blower motor too?
Yes — evaporator and condenser coils, the blower motor and assembly, and the heat exchanger are all part of a full HVAC cleaning.
How long does a full HVAC cleaning take?
[Confirm typical visit length for your team.]
How much does it cost?
It depends on system size and condition. A free inspection gets you a firm number first.
Will it lower my energy bills?
A system that isn't fighting buildup typically runs less to reach the same temperature, which can reduce costs.
Is it messy?
No — our sealed, negative-pressure system contains debris instead of releasing it into your rooms.
Do you service both heating and cooling components?
Yes — the same ductwork carries both, so we clean the connections to each.
Which Brooklyn neighborhoods do you serve?
All of Brooklyn, including Park Slope, Williamsburg, Bushwick, Bay Ridge, and Flatbush.
Serving Brooklyn's HVAC Systems
Book Your Free HVAC System Inspection
No obligation. No pressure. Just a clear look at what's actually inside your system.